Corundum hardener

REFLOOR® CT-S200

Corundum hardener for warehouses, logistics and production floors with forklift traffic, abrasion and impact.

≥ 85 MPaCompressive strength

0.10 g/cm²Abrasion (LKI-3M)

AR 0.5EN 13892-4

Where to use

Warehouses and logistics

Forklifts, stackers, trolleys, intensive traffic.

Production halls

Equipment, abrasion, impact from handling parts.

High-traffic car parks

Ramps and driveways where quartz wears quickly.

Not suitable

For old hardened concrete. A dry-shake hardener is applied only to freshly placed concrete.

Technical data

Technical data CT-S200
Composition	cement binder, graded fused alumina (corundum); no volatile solvents, odourless
Compressive strength, 28 days	≥ 85 MPa
Tensile strength, 28 days	≥ 8.5 MPa
Abrasion loss, LKI-3M disc	0.10 g/cm²
Wear resistance class (EN 13892-4, BCA)	AR 0.5
Impact resistance	20.0 kg/mm²
Bond strength (pull-off), 28 days	2.0 MPa
Shrinkage	≤ 0.09%
Bulk density of dry mix	1,870 kg/m³
Maximum aggregate size	3.2 mm
Hardened layer thickness	2–3 mm
Loads	foot traffic after 24 h; light loads (up to 200 kg/cm²) after 7 days; full strength at 28 days
Service temperature (short-term)	−60 to +300 °C
Resistance to aggressive media	non-aggressive and slightly aggressive media; high liquid exposure intensity (SNiP 2.03.13)
Compliance	GOST 31358-2019
Coverage	grey: 5–6 kg/m² — heavy duty, 7–8 kg/m² — severe duty; coloured: 7–8 kg/m²
Colours	natural grey, light grey, red, green, blue
Substrate	freshly placed concrete, class B22.5 (M300) or higher
Application temperature	optimal +10…+25 °C
Packaging	25 kg moisture-protected bag; 1,200 kg pallet (48 bags)

System

A dry-shake hardener reaches its strength only with proper curing.

Apply REFLOOR® AC-S200 curing & sealing compound right after final troweling: it cuts moisture loss of fresh concrete by 90%, reduces dusting and improves oil resistance. Economy option — AC-S120.

REFLOOR floor system